YUXI is great manufacturer of  board to board connecor and wire to board connector like pin header connector, female header connector  box header connector, ejector header conenctor,etc.pin  header connector , female header connector , box header connector , board to board connector , wire to board connector, ejector header connector , pogo pin , wafer, FPC connector

Yuxi Wechat

+86 769-85397456

pitch 1.0 Female Header Connector single row SMT U type terminal
  • This products PDF: download
  • Supporting product PDF: download
  • Pin bit: 1~50P
  • Rated current: 1 AMP
  • Pin material: phosphor copper
  • Plastic material: PA6T
  • Plastic height: 2.1mm
  • Withstand voltage: AC 500V/min
  • Contact resistance: 20 milliohm Max
  • Insulation resistance: 1000 MΩ Min
  • Working temperature: -40°C to 105°C
  • Electroplating thickness: 1u " Min Gold plating over all 30u" Min Nickel underplating over all

Female Header, one type of connector

1. Application: This connector is widely used in PCB circuit boards in electronics, electrical appliances and meters.

2. Function: Its function is to act as a bridge between blocked or isolated circuits in the circuit, and take on the task of current or signal transmission. It is usually used together with row mother to form plate-to-plate connection. Or matched with an electronic wire harness end to form board-to-board connection; It can also be used independently for board-to-board connection.

3. Classification: According to the spacing, it can be roughly divided in o 7 categories: 0.8mm, 1.0mm, 1.27mm, 2.00mm, 2.54mm, 3.96mm and 5.08mm (other special spacing can also be customized according to needs); According to the number of rows, there are single row of mothers, double row of mothers, three rows of mothers, four rows of mothers, etc. According to the packaging rules, there are SMT, DIP (Direct insrt/Bend insrt), etc. According to the installation method: 180 degrees, 90 degrees, SMT;; According to whether it is necessary to increase height and whether it is necessary to have positioning posts, there are two types of positioning posts, one is internal positioning posts and the other is ear positioning posts. Female terminal type: U-terminal and Y-terminal (U-terminal, contact with U-terminal with 3 surfaces of general plastic height; Y-terminal, contact with 2 sides generally plastic high with Y-terminal).



Product Name1.00 mm pitch one piece  1 row vertical SMT SMD female header connector
Pitch1.00 mm
Detailsingle layer one row vertical SMT type
HousingPA9T/LCP+30%G.F UL94V-0
Insulator  Height for Choice3.10mm
Pin02~50P
Contact MaterialPhosphor Brass
Insulator MaterialPBT,PA6T,PA9T,LCP,PA66,PA46,PPS,PA115(Halogen Free)
Rating Current0.75AMP
Contact Resistance20mΩ Max
Withstanding VoltageAC 500V/Minute
Insulating Resistance1000MΩ Min
Temperture Range-55°C to +125°C    
PlatingGold(Au) or Tin(Sn) plated over Nickel(Ni) 
PackagingPE Bag,Tube,Tape&Reel,Tube+CAP,Tray,Plastic Box

connector from Dongguan YUXI

Online booking

Tel
E-Mail
MAP
QQ